Service

√ Beautiful and elegant nature wood grain texture and touch with easy installation, thus can meet various requirements of customers.

√ Can be shaved, nailed, drilled and cut to fit accessories of different specifications.

√ Moldy-proof, resistant to rotting and splitting.

√ Acid-and-alkali-resistant, corrosion-resistant, moisture-resistant and pest resistance.

√ No painting, no glue, low maintenance.

√ Good weather ability, suitable from -40'C to +60'C

√ UV resistance, Fade resistant and Durable.

√ Dimension stability against moisture and temperature.

√ Environmental friendly, fully recyclable and no other hazard chemical.

For the first few months following installation, U-TIMBER composite products will naturally shift color as it begins to weather to a slightly lighter shade than the original color purchased. Like fine hardwood floo-ring, most color change will occur during the first three to six months. After this stage, U-TIMBER composite products will weather naturally and beauti-fully. Inconsistent or uneven exposure to sun and elements will cause the deck to weather unevenly first three to six months. Inconsistent or uneven exposure to sun and elements will cause the deck to weather unevenly. Although this condition is temporary, you can prevent uneven exposure by not covering the deck with rugs, mats or furniture during the first few weeks.

Ice and Snow

Calcium chloride or rock salt, available in many home centers, will melt ice on decking. Rinse off when first practical. Do not use metal shovels and sharp-edge tools: these can damage decking surface.

Water (Tannin) Stains

Tannin stains naturally occur in all wood species and sometimes migrate to the surface in composite decking where surface wood fibers are exposed to sun and water. Tannin stains may occur during or shortly after .Depending on the season this can take several weeks to several months. Once tannin stains disappear after the weathering process is complete, they do not re-appear. To hasten removal of tannin stains, use warm, soapy water or other commercial composite deck cleaner and a soft bristle brush. If you use a commercial composite deck cleaner, follow the manufacturer's instructions.

Chalk Markings

All colored chalk lines are permanent. Scrubbing the area with warm, soapy water and a soft bristle brush may dislodge some of the chalk.

Oil/ Grease/ Food Stains

All food spills should be removed as soon as possible. To remove, spray off with a hose and use warm, soapy water and a soft bristle brush to remove spills from the surface. Rinse with warm water.

Ink Stains

Inks may be permanent. However, scrubbing with warm soapy water may lighten the stain. Rinse thoroughly.

NEVER use Chlorine based cleaner.

Dirt or debris

Clean the decking to remove dirt or debris by using warm, soapy water and a soft bristle brush.

Mold & Mildew

If debris such as pollen and dirt is allowed to remain on the deck surface, mold can feed on the biofilm. Using a hose and warm, soapy water with a soft bristle brush is recommended to remove the food source and mold.